80% Hand Sanitiser for Salons: Refill and Display Tips

Quick answer

Place a 500ml 80% hand sanitiser bottle at each key touchpoint, refill before the bottle drops below a quarter full, and wipe the pump and surrounding surface daily. This keeps your salon station hygienic and ready for clients.

Why 80% alcohol matters for a busy salon

Salons involve close contact, shared tools, and frequent hand-to-surface touching. An 80% alcohol hand sanitiser is formulated to eliminate commonly occurring bacteria and viruses that are highly transmissible. That makes it a practical choice for reception desks, styling stations, and washrooms where water is not always available.

The 500 ML 80% Hand Sanitiser from Noblepack UK comes in a liquid form that rapidly evaporates and moisturises, leaving skin feeling clean, soft and smooth. For salon staff who sanitise between every client, that moisturising quality helps reduce the drying effect of frequent use.

Placement: where a hand sanitiser station actually gets used

A station only works if it is visible and within reach. Put one at the entrance or reception desk so clients can sanitise on arrival, one near each styling chair if space allows, and one in the staff break area. Avoid placing bottles directly beside open flames, hot styling tools, or direct sunlight, as alcohol-based sanitiser is flammable and heat can degrade the product.

For retail display, keep bottles upright and away from the edge of counters. A small tray or riser can contain drips and make the station look intentional rather than improvised.

Refill routine: timing and practical checks

Refill before the bottle is empty—ideally when it drops to about a quarter full—so the station never runs dry during a busy shift. Keep a spare 500ml bottle stored closed and upright in a cool, dry place away from direct sunlight. Label the refill date on the bottle or a nearby checklist so staff know when it was last topped up.

Do not top up a partially full bottle with a different brand or concentration without cleaning it first; mixing products can reduce effectiveness and make the label inaccurate. If you switch products, empty, clean, and dry the bottle before refilling.

Salon hand sanitiser station setup: step by step

1. Choose the right spots: Place a 500ml bottle at the entrance, reception desk, and staff area. Keep each bottle on a stable, non-porous tray or mat. Check that no station is within reach of children or near hot tools.
2. Label and date the bottle: Write the refill date on a small sticker on the bottle or on a checklist kept nearby. A dated bottle makes it easy to spot when a refill is overdue.
3. Refill before empty: Top up when the bottle is about a quarter full. Use a clean funnel if needed and wipe the bottle neck before closing. Never refill a bottle that has been sitting in direct sunlight or heat.
4. Clean the pump and surface daily: Wipe the pump, bottle exterior, and tray with a suitable disinfectant wipe at the end of each day. A sticky pump is a sign that product has dripped and needs cleaning.
5. Store spare stock correctly: Keep unopened 500ml bottles in a cool, dry cupboard away from sunlight and heat sources. Rotate stock so older bottles are used first.

Product facts

• 500 ML 80% Hand Sanitiser: 500 ML 80% Hand Sanitiser is an alcohol-based liquid that rapidly evaporates and moisturises. The 500ml size suits a busy salon station and the moisturising formula helps staff who sanitise frequently throughout the day.