How to Build a Tiered Jewellery Display with an Extendable Riser Set
By Noblepack UK | Published: 2026-10-31
Category: How-to Guides
Create a tiered jewellery display that sells with an extendable riser set. Follow these steps to set up, style, and adjust your risers for earrings, rings, and more.
Quick answer
To build a tiered jewellery display with an extendable riser set, start by assessing your counter space and the jewellery you plan to show. Then arrange the risers in a stepped formation—either fully extended or stacked—so each level is visible, and adjust the height and spacing to suit your pieces. Finally, place jewellery on each tier, using the Ice Grip interior to keep items secure.
Why tiered displays work on a shop counter
Tiered displays create visual hierarchy, drawing the eye from the front to the back and making better use of vertical space. On a busy shop counter, this means customers can see more pieces at a glance without the display feeling cluttered. An extendable riser set is particularly useful because it adapts to different counter depths and jewellery collections—you can spread it out for a wide, low profile or stack it for a compact, tall arrangement.
Choosing between extended and stacked setups
The Extendable Riser Set gives you two main configurations: fully extended or stacked. Fully extended, the three pieces cover a larger surface area, which suits long necklaces, multiple pairs of earrings, or a spread of rings. Stacked, the risers create a taller, more compact display that works well for showcasing a few statement pieces or for counters where space is tight. Consider the height of your counter and the eye level of your customers—generally, the most important pieces should sit at or slightly below eye level.
Matching riser height to jewellery type
Different jewellery types benefit from different tier heights. Earrings and rings often work best on lower tiers where customers can lean in for a closer look, while necklaces or larger pieces may need the added height of a stacked riser to hang or drape effectively. If you’re using display risers for earrings, keep the pairs together on one tier to avoid mixing sizes and styles. For rings, a flatter, extended arrangement makes it easier to browse.
Step-by-step setup for a tiered jewellery display
- Clear and measure your counter space: Remove existing displays and measure the width and depth of the area you want to use. Check that the risers will fit without overhanging or blocking access. Common mistake: forgetting to leave enough space for customers to reach the jewellery. Ensure at least 6 inches of clearance in front of the display for easy browsing.
- Decide on extended or stacked configuration: Lay out the three risers on the counter. For a fully extended setup, place the center riser in the middle with the two smaller risers on either side. For a stacked setup, place the smaller risers on top of the center riser. Check stability before adding jewellery. If stacking, make sure the smaller risers sit securely and don’t wobble.
- Arrange the tiers for visual flow: Position the risers so that the highest point is at the back and the lowest at the front, creating a natural step-down effect. This guides the customer’s eye from back to front. Common mistake: placing the tallest tier at the front, which can obscure pieces behind. Keep the tallest tier at the back unless you have a specific reason to highlight a front piece.
- Place jewellery by type and height: Put earrings and rings on the lower tiers, necklaces and bracelets on higher tiers. Group similar items together. Use the Ice Grip surface to hold pieces in place—press items gently to ensure they grip. Common mistake: overcrowding a single tier, which makes it hard to distinguish individual pieces. Leave about 1 inch between items on each tier to avoid visual clutter.
- Adjust height and spacing as needed: Step back and view the display from a customer’s perspective. If a piece is hard to see, move it to a different tier or adjust the riser configuration. You can also swap the smaller risers between left and right to change the balance. Common mistake: not testing the display from different angles, especially if the counter is viewed from multiple sides. Ask a colleague to view the display from the customer side and give feedback.
- Secure and finalise the display: Once you’re happy with the arrangement, gently press down on the risers to ensure they are stable. Check that no jewellery is hanging over the edges. If needed, add small labels or price tags without covering the pieces. Common mistake: forgetting to secure the risers, which can lead to accidental knocks. Do a final stability check by lightly tapping the counter near the display.
Product facts
- Extendable Riser Set: The set includes a center riser measuring 14.5" (w) x 11.5" (d) x 2" (h) and two smaller risers measuring 7" (w) x 9 1/4" (d) x 1.375" (h). These dimensions help you plan the footprint on your counter and decide whether to extend or stack based on available space.
Extendable Riser Set - Extendable Riser Set: The risers have an Ice Grip interior to keep everything in place. This means jewellery is less likely to slide or shift, so you can arrange pieces confidently without constant readjustment.
